From c619da13b0d1c9385a938769fecd939927df7b53 Mon Sep 17 00:00:00 2001 From: akukan Date: Tue, 28 Aug 2018 17:25:39 +0200 Subject: [PATCH] Delete z-axis-bottom.scad --- Printed-Parts/scad/z-axis-bottom.scad | 82 --------------------------- 1 file changed, 82 deletions(-) delete mode 100755 Printed-Parts/scad/z-axis-bottom.scad diff --git a/Printed-Parts/scad/z-axis-bottom.scad b/Printed-Parts/scad/z-axis-bottom.scad deleted file mode 100755 index 4c91430..0000000 --- a/Printed-Parts/scad/z-axis-bottom.scad +++ /dev/null @@ -1,82 +0,0 @@ -// PRUSA iteration3 -// Z axis bottom holder -// GNU GPL v3 -// Josef Průša and contributors -// http://www.reprap.org/wiki/Prusa_Mendel -// http://prusamendel.org - -module z_bottom_base(){ - translate([0,-1.5,0]) cube([8,49,16+25]); // plate touching the base - translate([0,-5,0]) cube([30,4.01,22]); // plate touching the base - translate([0,41.5,0]) cube([30,6.01,22]); // plate touching the base - translate([0,-5,0]) cube([50,52.5,5]); // plate touching the base -} - -module z_bottom_fancy(){ - // corner cutouts - translate([0.5,-2.5,0]) rotate([0,0,-45-180]) translate([-15,0,-1]) cube([30,30,51]); - translate([0.5,40-0.5+5,0]) rotate([0,0,-45+90]) translate([-15,0,-1]) cube([30,30,51]); - //translate([-4,40+5,5]) rotate([0,0,-35-0]) translate([0,0,0.1]) cube([30,30,51]); - //translate([-4+11,40+5+5,0]) rotate([0,0,-45-0]) translate([0,0,-1]) cube([30,30,51]); - translate([8,0,12+20+6]) rotate([0,-90,0]) translate([0,-5,0]) cube([30,50,30]); - translate([20,-2,12+8]) rotate([45,0,0]) rotate([0,-90,0]) translate([0,-5,0]) cube([30,50,30]); - translate([25,20,12+30]) rotate([-45,0,0]) rotate([0,-90,0]) translate([0,-5,0]) cube([30,50,30]); - translate([50-2.5,-5+2.5+67,0]) rotate([0,0,-45-90]) translate([-15,0,-1]) cube([30,30,51]); - translate([50-2.5,-5+2.5,0]) rotate([0,0,-45-90]) translate([-15,0,-1]) cube([30,30,51]); - //translate([50-1.5,10-1.5,0]) rotate([0,0,-45]) translate([-15,0,-1]) cube([30,30,51]); - //translate([0,0,5]) rotate([45+180,0,0]) rotate([0,0,-45+90]) translate([0,0,-15]) cube([30,30,30]); - // Stiffner cut out - translate([30,0,5.5]) rotate([0,-45,0]) translate([0,-5,0]) cube([30,60,30]); -} - -module z_bottom_holes(){ - // Frame mounting screw holes - translate([-1,10,10+5]) rotate([0,90,0]) cylinder(h = 20, r=1.8, $fn=30); - translate([-1,10+20,10+5]) rotate([0,90,0]) cylinder(h = 20, r=1.8, $fn=30); - translate([-1,10+10,10+20+5]) rotate([0,90,0]) cylinder(h = 20, r=1.8, $fn=30); - - // Frame mounting screw head holes - translate([4,10,10+5]) rotate([0,90,0]) cylinder(h = 20, r=3.1, $fn=30); - translate([4,10+20,10+5]) rotate([0,90,0]) cylinder(h = 20, r=3.1, $fn=30); - translate([4,10+10,10+20+5]) rotate([0,90,0]) cylinder(h = 20, r=3.1, $fn=30); - translate([4,10+10-3.1,10+20+5]) cube([10,6.2,10]); - - // Z rod holder - translate([25+4.3,3,-1]) rotate([0,0,0]) cylinder(h = 50, r=4.125, $fn=15); - translate([25+4.3-1,3,0.6]) cube([2,10,7]); // it's bit up because it helps with printing - - // motor mounting - translate([25+4.3,20,-1]){ - //translate([15.5,15.5,-1]) cylinder(h = 20, r=1.8, $fn=30); - - translate([15.5,15.5,-1]) cylinder(h = 20, r=1.8, $fn=30); - translate([15.5,-15.5,-1]) cylinder(h = 20, r=1.8, $fn=30); - translate([-15.5,15.5,-1]) cylinder(h = 20, r=1.8, $fn=30); - translate([-15.5,-15.5,-1]) cylinder(h = 20, r=1.8, $fn=30); - - - translate([0,0,-1]) cylinder(h = 20, r=12, $fn=30); - } - -} - -module z_bottom_right(){ - difference(){ - z_bottom_base(); - z_bottom_fancy(); - z_bottom_holes(); - } -} - -module z_bottom_left(){ - translate([0,-13,0]) mirror([0,1,0]) - difference(){ - z_bottom_base(); - z_bottom_fancy(); - z_bottom_holes(); - } -} - -//z_bottom_holder(); -#z_bottom_right(); -#z_bottom_left(); \ No newline at end of file