difference(){
union(){
translate([0,0,-1])cube([95,50+15,56]); // Base

translate([0,0,-3.5])cube([14-0.5,50+15,5]); // Back pillar 1

translate([60-0.5,0,-3.5])cube([14,50+15,5]); // Back pillar 2

translate([91+4,0,-1])cube([6,50+15,56]); // Base for bracket

translate([-2,45.4-4.6,19])cube([2,3,15]); // nipple on the right


translate([0,35,46.5])scale([1.2,1,0.2])rotate([-28,-50,-58])cube([45,45,30]);


//translate([94,20,13])scale([0.2,1.2,1])rotate([-29,-51,-48])cube([30,35,30]);
//translate([10,25,45])scale([1,1,0.3])rotate([-40,-50,-58])cube([40,30,30]);

translate([-1.6,0,0])cube([1.65,65,2]); // Frame skirt 1
translate([-1.6,0,0])cube([1.65,30,55]); // Frame skirt 2
translate([-1.6,0,51])cube([1.65,65,4]); // Frame skirt 3
}

//pretty corners
translate([-11,-2,-2])rotate([0,0,-45])cube([10,10,58]);
translate([95-3+5+1,-2,-2])rotate([0,0,-45])cube([10,10,58]);

translate([-3,-9,-5])rotate([-45,0,0])cube([130,10,10]);
translate([-3,-12,56])rotate([-45,0,0])cube([130,10,10]);

translate([-3,45+15,-5])rotate([-45,0,0])cube([130,10,10]);
translate([-3,48+15,56])rotate([-45,0,0])cube([130,10,10]);

translate([95-3+3,70,-2])rotate([0,0,-45])cube([10,10,58]);


translate([95,0-10,-20])rotate([0,-45,-45])cube([20,20,20]);
translate([95,0-10,45])rotate([0,-45,-45])cube([20,20,20]);


translate([95,60,-10])rotate([-35,-45,-45])cube([20,20,20]);
translate([95,60,65])rotate([-55,48,-48])cube([20,20,20]);

translate([79,-5,68.5])rotate([0,45,0])cube([20,90,20]);

translate([79,-5,-14.5])rotate([0,45,0])cube([20,90,20]);


translate([-14,-5,68.5])rotate([0,45,0])cube([20,90,20]);

translate([3,2,2])cube([89.02,50.02+15,50.02-0.7]); // main cutout

translate([-3,50-16.4+15,2])cube([100,16.5,50-0.7]); // insert cutout

translate([-3,50-16.4-15.6+15,2])cube([10,100,17]); // right bottom cutout

translate([85+2,50-16.4-17.6+15+0.9,2])cube([10,100,50-0.7]); // left bottom cutout

translate([-3,50-16.4-17.6+15+0.9,2])cube([100,100,10]); //  bottom cutout

translate([5.5,0,0]){
translate([45,2,40])cube([27.5,31.9,30]); // socket cutout
translate([45-4.5,2+15.6,40])cylinder(r=2,h=50, $fn=8); // socket right hole cutout
translate([45-4.5+37-0.5,2+15.6,40])cylinder(r=2,h=50, $fn=8); // socket left hole cutout

translate([1,2,44])cube([20,14,30]); // switch cutout

translate([45-4.5+37-0.5,2+15.6,40])cylinder(r=3.25,h=15-1.5, $fn=6); // socket left hole cutout nuttrap
translate([45-4.5,2+15.6,40])cylinder(r=3.25,h=15-1.5, $fn=6); // socket left hole cutout nuttrap
}
translate([20,50,54.5])linear_extrude(height = 1) {
       text("Prusa3D", center=true);
     }

/*
translate([8,40-1+15,40])cylinder(r=2,h=50,$fn=15); //  left front mounthole cutout
translate([8,40-1+15,53.6])cylinder(r1=2, r2=3.5,h=1.5,$fn=15);

translate([87,40-1+15,40])cylinder(r=2,h=50,$fn=15); //  right front mounthole cutout
translate([87,40-1+15,53.6])cylinder(r1=2, r2=3.5,h=1.5,$fn=15);
*/

translate([7-0.5-0.5,40-1+15+0.7,-10])cylinder(r=2,h=50,$fn=15); //  left back mounthole cutout
translate([7-0.5-0.5,40-1+15+0.7,-3.7])cylinder(r2=2, r1=3.5,h=1.5,$fn=15);

translate([67.5-0.7-0.5,43.5-1+15+0.5,-10])cylinder(r=2,h=50,$fn=15); //  right back mounthole cutout
translate([67.5-0.7-0.5,43.5-1+15+0.5,-3.7])cylinder(r2=2, r1=3.5,h=1.5,$fn=15);


translate([130,32+26,55-4-25])rotate([0,-90,0])cylinder(r=2.5,h=50,$fn=35); // Left side bracket screw hole
translate([101.1,32+26,55-4-25])rotate([0,-90,0])cylinder(r2=2.5, r1=4.1,h=3,$fn=15);

for(i=[0:10]){
translate([20+i,6,-10])cylinder(r=3,h=50); //  left back mounthole cutout
}



}