Michal
/
Prusa-Firmware-ESP32-Cam
mirror of https://github.com/prusa3d/Prusa-Firmware-ESP32-Cam
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Update README.md

pull/25/head
Miroslav Pivovarsky 2024-05-13 23:01:38 +02:00 committed by GitHub
parent 4ac2df615b
commit 51f6249c4d
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
1 changed files with 12 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
README.md
View File

@ -26,6 +26,7 @@ What we need for functionality
- Power supply [here](#power_supply) - Power supply [here](#power_supply)
- Debug logs [here](#logs) - Debug logs [here](#logs)
- Serial console configuration [here](#serial_cfg) - Serial console configuration [here](#serial_cfg)
- Video stream [here](#stream)
- Potential issue [here](#issue) - Potential issue [here](#issue)
<a name="esp32"></a> <a name="esp32"></a>
@ -342,7 +343,12 @@ Currently, available commands are listed in the table below:
| getwifistastatus | Print WiFi STA status. Connected/Disconnected/Connecting.... | | getwifistastatus | Print WiFi STA status. Connected/Disconnected/Connecting.... |
| getwifistaip | Print IP address for WiFi STA | | getwifistaip | Print IP address for WiFi STA |
| getserviceapssid | Print service AP SSID name | | getserviceapssid | Print service AP SSID name |
| setauthtoken: | Set authentication token for Prusa Connect | | setauthtoken | Set authentication token for Prusa Connect |
| otaupdate | Start OTA update process |
| resolution | Set photo resolution |
| photoquality | Set photo quality |
| setflash | enable/disable LED flash |
| setlight | enable/disable LED light |
The standard command sequence for camera basic settings is The standard command sequence for camera basic settings is
@ -352,9 +358,13 @@ The standard command sequence for camera basic settings is
- setauthtoken:TOKEN; - setauthtoken:TOKEN;
- mcureboot; - mcureboot;
<a name="stream"></a>
## Video stream
The video stream is available on the WEB page **http://IP/stream.mjpg**
<a name="issue"></a> <a name="issue"></a>
## Potential issue ## Potential issue
- A potential issue may arise with connecting to the service AP. If the connection fails and an authentication error occurs, it is necessary to clear the FLASH memory of the processor, and FLASH FW again. This can be done either through the Arduino IDE or using official software. - A potential issue may arise with connecting to the service AP. If the connection fails and an authentication error occurs, it is necessary to clear the FLASH memory of the processor, and FLASH FW again. This can be done either through the Arduino IDE or using official software.
- While sending the photo to the backend, the WEB server is temporarily disabled for this short interval. After the photo is sent to the backend, the WEB server is re-enabled. This may cause short unavailability in the WEB server on the camera, lasting several seconds, depending on the internet connection and the quality of the WiFi connection
- After the initial firmware upload to the new camera, there may be an issue when connecting to the IP address, where the camera prompts for a username and password to access the web page. Even when entering the username "admin" and the password "admin", the login still doesn't work. In such cases, it's necessary to reset the camera configuration to factory settings. The procedure is outlined in the readme file [here](#factory_cfg) - After the initial firmware upload to the new camera, there may be an issue when connecting to the IP address, where the camera prompts for a username and password to access the web page. Even when entering the username "admin" and the password "admin", the login still doesn't work. In such cases, it's necessary to reset the camera configuration to factory settings. The procedure is outlined in the readme file [here](#factory_cfg)