diff --git a/ESP32_PrusaConnectCam/camera.cpp b/ESP32_PrusaConnectCam/camera.cpp
index 4334e82..01c6f80 100644
--- a/ESP32_PrusaConnectCam/camera.cpp
+++ b/ESP32_PrusaConnectCam/camera.cpp
@@ -90,7 +90,7 @@ void Camera::InitCameraModule() {
   CameraConfig.pin_sccb_scl = SIOC_GPIO_NUM;
   CameraConfig.pin_pwdn = PWDN_GPIO_NUM;
   CameraConfig.pin_reset = RESET_GPIO_NUM;
-  CameraConfig.xclk_freq_hz = 16500000;       // or 3000000; 16500000; 20000000
+  CameraConfig.xclk_freq_hz = 15000000;       // or 3000000; 16500000; 20000000
   CameraConfig.pixel_format = PIXFORMAT_JPEG; /* YUV422,GRAYSCALE,RGB565,JPEG */
 
   /* OV2640
@@ -110,7 +110,7 @@ void Camera::InitCameraModule() {
   CameraConfig.jpeg_quality = PhotoQuality;         /* 10-63 lower number means higher quality */
   CameraConfig.fb_count = 1;                        /* picture frame buffer alocation */
   CameraConfig.grab_mode = CAMERA_GRAB_LATEST;      /* CAMERA_GRAB_WHEN_EMPTY or CAMERA_GRAB_LATEST */
-  //CameraConfig.fb_location = CAMERA_FB_IN_PSRAM;    /* CAMERA_FB_IN_PSRAM or CAMERA_FB_IN_DRAM  */
+  CameraConfig.fb_location = CAMERA_FB_IN_PSRAM;    /* CAMERA_FB_IN_PSRAM or CAMERA_FB_IN_DRAM  */
   
   if (CameraConfig.fb_location == CAMERA_FB_IN_DRAM) {
     log->AddEvent(LogLevel_Verbose, F("Camera frame buffer location: DRAM"));
@@ -125,7 +125,7 @@ void Camera::InitCameraModule() {
   if (err != ESP_OK) {
     log->AddEvent(LogLevel_Warning, F("Camera init failed. Error: "), String(err, HEX));
     log->AddEvent(LogLevel_Warning, F("Reset ESP32-cam!"));
-    ESP.restart();
+    //ESP.restart();
   } 
 }
 
diff --git a/ESP32_PrusaConnectCam/mcu_cfg.h b/ESP32_PrusaConnectCam/mcu_cfg.h
index ac0af2c..10acbe4 100644
--- a/ESP32_PrusaConnectCam/mcu_cfg.h
+++ b/ESP32_PrusaConnectCam/mcu_cfg.h
@@ -14,9 +14,10 @@
 #define _MCU_CFG_H_
 
 /* ----------------- CAMERA TYPE  ---------------*/
-#define AI_THINKER_ESP32_CAM
+//#define AI_THINKER_ESP32_CAM
 //#define ESP32_WROVER_DEV
 //#define CAMERA_MODEL_ESP32_S3_CAM
+#define CAMERA_MODEL_ESP32_S3_EYE_2_2
 
 /* ---------------- BASIC MCU CFG  --------------*/
 #define SW_VERSION                  "1.1.0-rc1"                 ///< SW version
diff --git a/ESP32_PrusaConnectCam/module_ESP32-S3-EYE_2_2.h b/ESP32_PrusaConnectCam/module_ESP32-S3-EYE_2_2.h
new file mode 100644
index 0000000..45b525a
--- /dev/null
+++ b/ESP32_PrusaConnectCam/module_ESP32-S3-EYE_2_2.h
@@ -0,0 +1,88 @@
+/**
+   @file module_ESP32-S3-EYE_2_2.h
+
+   @brief Definition of the ESP32-S3 EYE 2.2 module
+
+   @author Miroslav Pivovarsky
+   Contact: miroslav.pivovarsky@gmail.com
+
+   Board configuration in the arduino IDE 2.3.2
+   Tools -> Board -> ESP32 Arduino -> ESP32S3 Dev Module
+   Tools -> USB CDC on BOOT -> Enabled
+   Tools -> CPU Frequency -> 240MHz (WiFi/BT)
+   Tools -> Core debug level -> None
+   Tools -> USB DFU on BOOT -> Disable
+   Tools -> Events Run On -> Core 0
+   Tools -> Flash Mode -> DIO 80MHz
+   Tools -> Flash Size -> 8MB
+   Tools -> Jtag Adapter -> Disable
+   Tools -> Arduino Runs On -> Core 0
+   Tools -> USB Firmware MSC On Boot -> Disable
+   Tools -> Partition scheme -> Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
+   Tools -> PSRAM -> QSPI PSRAM
+   Tools -> Upload Mode -> USB-OTG CDC (TinyUSB)
+   Tools -> Upload Speed -> 921600
+   Tools -> USB Mode -> USB-OTG (TinyUSB)
+   Tools -> Zigbee mode -> Disable
+
+   https://github.com/espressif/esp-who/blob/master/docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md
+
+   @bug: Currently SW don't work with this DEV board
+
+*/
+
+#pragma once
+
+#include "mcu_cfg.h"
+
+#ifdef CAMERA_MODEL_ESP32_S3_EYE_2_2
+
+/* --------------- CAMERA CFG -------------------*/
+#define PWDN_GPIO_NUM               -1      ///< Power down control pin
+#define RESET_GPIO_NUM              -1      ///< Reset control pin
+#define SIOD_GPIO_NUM               4       ///< SCCB: SI/O data pin
+#define SIOC_GPIO_NUM               5       ///< SCCB: SI/O control pin
+#define Y2_GPIO_NUM                 11      ///< SCCB: Y2 pin
+#define Y3_GPIO_NUM                 9       ///< SCCB: Y3 pin
+#define Y4_GPIO_NUM                 8       ///< SCCB: Y4 pin
+#define Y5_GPIO_NUM                 10      ///< SCCB: Y5 pin
+#define Y6_GPIO_NUM                 12      ///< SCCB: Y6 pin
+#define Y7_GPIO_NUM                 18      ///< SCCB: Y7 pin
+#define Y8_GPIO_NUM                 17      ///< SCCB: Y8 pin
+#define Y9_GPIO_NUM                 16      ///< SCCB: Y9 pin
+#define VSYNC_GPIO_NUM              6       ///< Vertical sync pin
+#define HREF_GPIO_NUM               7       ///< Line sync pin
+#define PCLK_GPIO_NUM               13      ///< Pixel clock pin
+#define XCLK_GPIO_NUM               15      ///< External clock pin
+
+/* ------------------ MCU CFG  ------------------*/
+#define ENABLE_BROWN_OUT_DETECTION  false   ///< Enable brown out detection
+
+/* --------------- OTA UPDATE CFG  --------------*/
+#define OTA_UPDATE_FW_FILE          PSTR("ESP32_S3_EYE_22_PrusaConnectCam.ino.bin") ///< OTA update firmware file name
+
+/* --------------- FLASH LED CFG  ---------------*/
+#define ENABLE_CAMERA_FLASH         false   ///< Enable camera flash function
+#define FLASH_GPIO_NUM              4       ///< Flash control pin
+#define FLASH_OFF_STATUS            0       ///< PWM intensity LED for OFF. 0-2^FLASH_PWM_RESOLUTION = 0-255
+#define FLASH_ON_STATUS             205     ///< PWM intensity LED for ON. limitation to 80%. 2^FLASH_PWM_RESOLUTION * 0.8% = 204
+#define FLASH_PWM_FREQ              2000    ///< frequency of pwm [240MHz / (100 prescale * pwm cycles)] = frequency
+#define FLASH_PWM_CHANNEL           0       ///< channel 0
+#define FLASH_PWM_RESOLUTION        8       ///< range 1-20bit. 8bit = 0-255 range
+
+/* --------------- SD CARD CFG  ---------------*/
+#define ENABLE_SD_CARD              true   ///< Enable SD card function
+#define SD_PIN_CLK                  39      ///< GPIO pin for SD card clock
+#define SD_PIN_CMD                  38      ///< GPIO pin for SD card command
+#define SD_PIN_DATA0                40      ///< GPIO pin for SD card data 0
+
+/* ---------- RESET CFG CONFIGURATION  ----------*/
+#define CFG_RESET_PIN               2      ///< GPIO 16 is for reset CFG to default
+
+/* -------------- STATUS LED CFG ----------------*/
+#define STATUS_LED_ENABLE           true    ///< enable/disable status LED
+#define STATUS_LED_GPIO_NUM         34      ///< GPIO pin for status LED
+#define STATUS_LED_OFF_PIN_LEVEL    LOW    ///< GPIO pin level for status LED ON
+
+#endif  // ESP32_WROVER_DEV
+/* EOF */
\ No newline at end of file
diff --git a/ESP32_PrusaConnectCam/module_templates.h b/ESP32_PrusaConnectCam/module_templates.h
index 5af0d6d..e716509 100644
--- a/ESP32_PrusaConnectCam/module_templates.h
+++ b/ESP32_PrusaConnectCam/module_templates.h
@@ -23,6 +23,9 @@
 #elif defined(CAMERA_MODEL_ESP32_S3_CAM)
 #include "module_ESP32_S3_CAM.h"
 
+#elif defined(CAMERA_MODEL_ESP32_S3_EYE_2_2)
+#include "module_ESP32-S3-EYE_2_2.h"
+
 #else
 #error "No module selected"
 
diff --git a/ESP32_PrusaConnectCam/wifi_mngt.cpp b/ESP32_PrusaConnectCam/wifi_mngt.cpp
index 4d767fc..ffd65e0 100644
--- a/ESP32_PrusaConnectCam/wifi_mngt.cpp
+++ b/ESP32_PrusaConnectCam/wifi_mngt.cpp
@@ -332,7 +332,7 @@ uint8_t WiFiMngt::ScanWifiNetwork(String ssid) {
 
       // Print SSID and RSSI for each network found
       char formattedString[100] = { '\0' };
-      sprintf(formattedString, "%2d | %-32.32s | %4d | %2d | %-17s | %s", i + 1,
+      sprintf(formattedString, "%2d | %-32.32s | %4ld | %2ld | %-17s | %s", i + 1,
               WiFi.SSID(i).c_str(), WiFi.RSSI(i), WiFi.channel(i), WiFi.BSSIDstr(i).c_str(), TranslateWiFiEncrypion(WiFi.encryptionType(i)).c_str());
       log->AddEvent(LogLevel_Info, formattedString);
     }