From b559cbaa42bc6a7e1221feff46d234ec31c01612 Mon Sep 17 00:00:00 2001
From: Miroslav Pivovarsky <miroslav.pivovarsky@compote.eu>
Date: Fri, 12 Jul 2024 22:00:28 +0200
Subject: [PATCH] update build script

---
 fw_build.sh | 68 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 67 insertions(+), 1 deletion(-)

diff --git a/fw_build.sh b/fw_build.sh
index a99db0a..3bc52a0 100644
--- a/fw_build.sh
+++ b/fw_build.sh
@@ -80,6 +80,7 @@
 # 8. Install necessary libraries:
 #    ./arduino-cli lib install ArduinoJson
 #    ./arduino-cli lib install ArduinoUniqueID
+#    ./arduino-cli lib install DHTNEW
 #    ./arduino-cli lib install --zip-path ../libraries/zip/AsyncTCP-3.1.4.zip
 #    ./arduino-cli lib install --zip-path ../libraries/zip/ESPAsyncWebServer-2.10.8.zip
 #    Check installed libraries again:
@@ -89,7 +90,18 @@
 #    ./arduino-cli core install esp32:esp32
 
 # ---------------------------------------------
+set -e
+
+if [ -d "build" ]; then
+   rm -rf build
+fi
+
 cd ESP32_PrusaConnectCam
+if [ ! -f arduino-cli ]; then
+   echo "arduino-cli not found. Please download arduino-cli and place it in the same folder as this script."
+   exit 1
+fi
+
 mkdir -p ../build/output
 build_start=`date`
 
@@ -100,6 +112,10 @@ echo "Building Ai Thinker board"
 mkdir -p ../build/esp32-cam
 sed -i 's/#define \(AI_THINKER_ESP32_CAM\|ESP32_WROVER_DEV\|CAMERA_MODEL_ESP32_S3_DEV_CAM\|CAMERA_MODEL_ESP32_S3_EYE_2_2\|CAMERA_MODEL_XIAO_ESP32_S3_CAM\|CAMERA_MODEL_ESP32_S3_CAM\) .*/#define \1 false/' mcu_cfg.h && sed -i 's/#define AI_THINKER_ESP32_CAM false/#define AI_THINKER_ESP32_CAM true/' mcu_cfg.h
 ./arduino-cli compile -v -b esp32:esp32:esp32cam:CPUFreq=240,FlashFreq=80,FlashMode=dio,PartitionScheme=min_spiffs,DebugLevel=none,EraseFlash=none  --output-dir ../build/esp32-cam
+if [ $? -ne 0 ]; then
+   echo "Build failed, exiting."
+   exit 1
+fi
 
 rm -f ../build/esp32-cam/ESP32_PrusaConnectCam.ino.elf
 rm -f ../build/esp32-cam/ESP32_PrusaConnectCam.ino.map
@@ -116,6 +132,10 @@ echo "Building ESP32 Wrover Dev board"
 mkdir ../build/esp32-wrover-dev
 sed -i 's/#define \(AI_THINKER_ESP32_CAM\|ESP32_WROVER_DEV\|CAMERA_MODEL_ESP32_S3_DEV_CAM\|CAMERA_MODEL_ESP32_S3_EYE_2_2\|CAMERA_MODEL_XIAO_ESP32_S3_CAM\|CAMERA_MODEL_ESP32_S3_CAM\) .*/#define \1 false/' mcu_cfg.h && sed -i 's/#define ESP32_WROVER_DEV false/#define ESP32_WROVER_DEV true/' mcu_cfg.h
 ./arduino-cli compile -v -b esp32:esp32:esp32wrover:FlashFreq=80,FlashMode=dio,PartitionScheme=min_spiffs,DebugLevel=none,EraseFlash=none --output-dir ../build/esp32-wrover-dev
+if [ $? -ne 0 ]; then
+   echo "Build failed, exiting."
+   exit 1
+fi
 
 rm -f ../build/esp32-wrover-dev/ESP32_PrusaConnectCam.ino.elf
 rm -f ../build/esp32-wrover-dev/ESP32_PrusaConnectCam.ino.map
@@ -131,8 +151,11 @@ echo "----------------------------------------------"
 echo "Building ESP32-S3-EYE 2.2 board"
 mkdir ../build/esp32-s3-eye-22
 sed -i 's/#define \(AI_THINKER_ESP32_CAM\|ESP32_WROVER_DEV\|CAMERA_MODEL_ESP32_S3_DEV_CAM\|CAMERA_MODEL_ESP32_S3_EYE_2_2\|CAMERA_MODEL_XIAO_ESP32_S3_CAM\|CAMERA_MODEL_ESP32_S3_CAM\) .*/#define \1 false/' mcu_cfg.h && sed -i 's/#define CAMERA_MODEL_ESP32_S3_EYE_2_2 false/#define CAMERA_MODEL_ESP32_S3_EYE_2_2 true/' mcu_cfg.h
-
 ./arduino-cli compile -v -b esp32:esp32:esp32s3:USBMode=hwcdc,CDCOnBoot=cdc,MSCOnBoot=default,DFUOnBoot=default,UploadMode=cdc,CPUFreq=240,FlashMode=dio,FlashSize=8M,PartitionScheme=min_spiffs,DebugLevel=none,PSRAM=opi,LoopCore=0,EventsCore=0,EraseFlash=none,JTAGAdapter=default,ZigbeeMode=default --output-dir ../build/esp32-s3-eye-22
+if [ $? -ne 0 ]; then
+   echo "Build failed, exiting."
+   exit 1
+fi
 
 rm -f ../build/esp32-s3-eye-22/ESP32_PrusaConnectCam.ino.elf
 rm -f ../build/esp32-s3-eye-22/ESP32_PrusaConnectCam.ino.map
@@ -142,11 +165,54 @@ cp ../build/esp32-s3-eye-22/ESP32_PrusaConnectCam.ino.bin ../build/output/ESP32S
 cd ../build/esp32-s3-eye-22 && zip -r ../esp32-s3-eye-22.zip . && cd -
 mv ../build/esp32-s3-eye-22.zip ../build/output/
 
+# ----------------- XIAO ESP32-S3 Sense -----------------
+# build XIAO ESP32-S3 Sense
+echo "----------------------------------------------"
+echo "Building XIAO ESP32-S3 Sense"
+mkdir ../build/xiao-esp32-s3
+sed -i 's/#define \(AI_THINKER_ESP32_CAM\|ESP32_WROVER_DEV\|CAMERA_MODEL_ESP32_S3_DEV_CAM\|CAMERA_MODEL_ESP32_S3_EYE_2_2\|CAMERA_MODEL_XIAO_ESP32_S3_CAM\|CAMERA_MODEL_ESP32_S3_CAM\) .*/#define \1 false/' mcu_cfg.h && sed -i 's/#define CAMERA_MODEL_XIAO_ESP32_S3_CAM false/#define CAMERA_MODEL_XIAO_ESP32_S3_CAM true/' mcu_cfg.h
+./arduino-cli compile -v -b esp32:esp32:XIAO_ESP32S3:USBMode=hwcdc,CDCOnBoot=default,MSCOnBoot=default,DFUOnBoot=default,UploadMode=default,CPUFreq=160,FlashMode=qio,FlashSize=8M,PartitionScheme=default_8MB,DebugLevel=none,PSRAM=opi,LoopCore=1,EventsCore=1,EraseFlash=none,JTAGAdapter=default --output-dir ../build/xiao-esp32-s3
+if [ $? -ne 0 ]; then
+   echo "Build failed, exiting."
+   exit 1
+fi
+
+rm -f ../build/xiao-esp32-s3/ESP32_PrusaConnectCam.ino.elf
+rm -f ../build/xiao-esp32-s3/ESP32_PrusaConnectCam.ino.map
+rm -f ../build/xiao-esp32-s3/ESP32_PrusaConnectCam.ino.merged.bin
+cp ../build/xiao-esp32-s3/ESP32_PrusaConnectCam.ino.bin ../build/output/XIAO_ESP32S3.bin
+
+cd ../build/xiao-esp32-s3 && zip -r ../xiao-esp32-s3.zip . && cd -
+mv ../build/xiao-esp32-s3.zip ../build/output/
+
+# ----------------- ESP32-S3-CAM -----------------
+# build ESP32-S3-CAM
+echo "----------------------------------------------"
+echo "Building ESP32-S3-CAM"
+mkdir ../build/esp32-s3-cam
+sed -i 's/#define \(AI_THINKER_ESP32_CAM\|ESP32_WROVER_DEV\|CAMERA_MODEL_ESP32_S3_DEV_CAM\|CAMERA_MODEL_ESP32_S3_EYE_2_2\|CAMERA_MODEL_XIAO_ESP32_S3_CAM\|CAMERA_MODEL_ESP32_S3_CAM\) .*/#define \1 false/' mcu_cfg.h && sed -i 's/#define CAMERA_MODEL_ESP32_S3_CAM false/#define CAMERA_MODEL_ESP32_S3_CAM true/' mcu_cfg.h
+./arduino-cli compile -v -b esp32:esp32:esp32s3:USBMode=hwcdc,CDCOnBoot=default,MSCOnBoot=default,DFUOnBoot=default,UploadMode=default,CPUFreq=240,FlashMode=dio,FlashSize=16M,PartitionScheme=min_spiffs,DebugLevel=none,PSRAM=opi,LoopCore=0,EventsCore=0,EraseFlash=none,JTAGAdapter=default,ZigbeeMode=default --output-dir ../build/esp32-s3-cam
+if [ $? -ne 0 ]; then
+   echo "Build failed, exiting."
+   exit 1
+fi
+
+rm -f ../build/esp32-s3-cam/ESP32_PrusaConnectCam.ino.elf
+rm -f ../build/esp32-s3-cam/ESP32_PrusaConnectCam.ino.map
+rm -f ../build/esp32-s3-cam/ESP32_PrusaConnectCam.ino.merged.bin
+cp ../build/esp32-s3-cam/ESP32_PrusaConnectCam.ino.bin ../build/output/esp32-s3-cam.bin
+
+cd ../build/esp32-s3-cam && zip -r ../esp32-s3-cam.zip . && cd -
+mv ../build/esp32-s3-cam.zip ../build/output/
+
 # --------------------------------------------------------
+# Print build completion message
 echo "----------------------------------------------"
 echo "Build completed. Output files are in the output folder."
 echo "Start build: $build_start"
 echo "End build: `date`"
+echo ""
+ls -lah ../build/output/
 
 exit 0