Michal
/
Prusa-Firmware-ESP32-Cam
mirror of https://github.com/prusa3d/Prusa-Firmware-ESP32-Cam
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

update docu

pull/60/head
Miroslav Pivovarsky 2024-07-12 23:31:45 +02:00
parent c314783328
commit d1949c0159
3 changed files with 3 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
ESP32_PrusaConnectCam/module_XIAO_ESP32-S3-cam.h
View File

@ -15,7 +15,7 @@
Board configuration in the arduino IDE 2.3.2
Tools -> Board -> ESP32 Arduino -> XIAO_ESP32S3
Tools -> USB CDC on BOOT -> Enabled
Tools -> CPU Frequency -> 240MHz (WiFi)
Tools -> CPU Frequency -> 160MHz (WiFi)
Tools -> Core debug level -> None
Tools -> USB DFU on BOOT -> Disable
Tools -> Erase all Flash Before Sketch Upload -> Disable (first flash, new board = enable. otherwise = disable)

10
doc/XIAO_ESP32S3/README.md
View File

@ -92,13 +92,7 @@ In the first step, you need to open the application **flash download tool**, and
<img src="chip_select.jpg" width=25% height=25%>
Then, select the communication port. It's necessary to erase the FLASH using the **ERASE** button before the first firmware flash.
Before erasing the FLASH memory, it is necessary to switch the board to bootloader mode. Hold down the BOOT button (red arrow), press the RESET button (green arrow), wait for 1 second, and release the BOOT button. Then, you can erase the FLASH memory using the ERASE button. After a successful erase, the status will change to FINISH.
<img src="flash_button.png" width=30% height=30%>
Then is possible upload FW to MCU. It is necessary again switch the board to bootloader mode. Hold down the BOOT button (red arrow), press the RESET button (green arrow), wait for 1 second, and release the BOOT button. Then, you can erase the FLASH memory using the ERASE button.
Then, select the communication port. It's necessary to erase the FLASH using the ERASE button before the first firmware flash.
<img src="flash.jpg" width=30% height=30%>
@ -108,7 +102,7 @@ Then is possible upload FW to MCU. It is necessary again switch the board to boo
Board configuration in the Arduino IDE 2.3.2
- Tools -> Board -> ESP32 Arduino -> XIAO_ESP32S3
- Tools -> USB CDC on BOOT -> Enabled
- Tools -> CPU Frequency -> 240MHz (WiFi)
- Tools -> CPU Frequency -> 160MHz (WiFi)
- Tools -> Core debug level -> None
- Tools -> USB DFU on BOOT -> Disable
- Tools -> Erase all Flash Before Sketch Upload -> Disable **(first flash, new board = enable. otherwise = disable)**

BIN
doc/XIAO_ESP32S3/flash.jpg
View File

Binary file not shown.
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 80 KiB

After

Width:  |  Height:  |  Size: 79 KiB