Add support for M5Stack Timer camera

ESP32_PrusaConnectCam/mcu_cfg.h

@@ -20,6 +20,7 @@
 #define CAMERA_MODEL_XIAO_ESP32_S3_CAM  false
 #define CAMERA_MODEL_ESP32_S3_CAM       false
 #define ESP32_S3_WROOM_FREENOVE         false
+#define M5STACK_TIMERCAMERA             false
 
 /* ---------------- BASIC MCU CFG  --------------*/
 #define SW_VERSION                  "1.1.2"                 ///< SW version

ESP32_PrusaConnectCam/module_M5Stack_TimerCam.h

@@ -0,0 +1,91 @@
+/**
+   @file module_M5Stack_TimerCam.h
+
+   @brief Definition of the M5Stack TimerCamera module
+
+   @author Miroslav Pivovarsky
+   Contact: miroslav.pivovarsky@gmail.com
+
+   https://docs.m5stack.com/en/unit/timercam
+
+   Board configuration in the arduino IDE 2.3.2
+   Tools -> Board -> ESP32 Arduino -> ESP32 Dev Module
+   Tools -> CPU Frequency -> 240MHz (WiFi/BT)
+   Tools -> Core debug level -> None
+   Tools -> Flash frequency -> 80MHz
+   Tools -> Flash Mode -> DIO
+   Tools -> Partition scheme -> Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
+
+   @bug: no know bug
+
+*/
+
+#pragma once
+
+#include "mcu_cfg.h"
+
+#ifdef M5STACK_TIMERCAMERA
+
+/* --------------- CAMERA CFG -------------------*/
+#define PWDN_GPIO_NUM               -1      ///< Power down control pin
+#define RESET_GPIO_NUM              15      ///< Reset control pin
+#define XCLK_GPIO_NUM               27      ///< External clock pin
+#define SIOD_GPIO_NUM               25      ///< SCCB: SI/O data pin
+#define SIOC_GPIO_NUM               23      ///< SCCB: SI/O control pin
+#define Y9_GPIO_NUM                 19      ///< SCCB: Y9 pin
+#define Y8_GPIO_NUM                 36      ///< SCCB: Y8 pin
+#define Y7_GPIO_NUM                 18      ///< SCCB: Y7 pin
+#define Y6_GPIO_NUM                 39      ///< SCCB: Y6 pin
+#define Y5_GPIO_NUM                 5       ///< SCCB: Y5 pin
+#define Y4_GPIO_NUM                 34      ///< SCCB: Y4 pin
+#define Y3_GPIO_NUM                 35      ///< SCCB: Y3 pin
+#define Y2_GPIO_NUM                 32      ///< SCCB: Y2 pin
+#define VSYNC_GPIO_NUM              22      ///< Vertical sync pin
+#define HREF_GPIO_NUM               26      ///< Line sync pin
+#define PCLK_GPIO_NUM               21      ///< Pixel clock pin
+
+/* ------------------ MCU CFG  ------------------*/
+#define BOARD_NAME                  F("M5Stack TimerCamera") ///< Board name
+#define ENABLE_BROWN_OUT_DETECTION  true   ///< Enable brown out detection
+#define ENABLE_PSRAM                true  ///< Enable PSRAM
+
+/* --------------- OTA UPDATE CFG  --------------*/
+#define OTA_UPDATE_FW_FILE          PSTR("ESP32_PrusaConnectCam.ino.bin") ///< OTA update firmware file name
+#define FW_STATUS_LED_PIN           4      ///< GPIO pin for status FW update LED
+#define FW_STATUS_LED_LEVEL_ON      HIGH   ///< GPIO pin level for status LED ON
+
+/* --------------- FLASH LED CFG  ---------------*/
+#define ENABLE_CAMERA_FLASH         false    ///< Enable camera flash function
+#define CAMERA_FLASH_DIGITAL_CTRL   false   ///< Enable camera flash digital control
+#define CAMERA_FLASH_PWM_CTRL       false    ///< Enable camera flash PWM control
+#define CAMERA_FLASH_NEOPIXEL       false   ///< Enable camera flash NeoPixel control
+#define FLASH_GPIO_NUM              4       ///< Flash control pin
+#define FLASH_NEOPIXEL_LED_PIN      -1      ///< External flash control pin. RGB LED NeoPixel
+#define FLASH_OFF_STATUS            0       ///< PWM intensity LED for OFF. 0-2^FLASH_PWM_RESOLUTION = 0-255
+#define FLASH_ON_STATUS             205     ///< PWM intensity LED for ON. limitation to 80%. 2^FLASH_PWM_RESOLUTION * 0.8% = 204
+#define FLASH_PWM_FREQ              2000    ///< frequency of pwm [240MHz / (100 prescale * pwm cycles)] = frequency
+#define FLASH_PWM_CHANNEL           0       ///< channel 0
+#define FLASH_PWM_RESOLUTION        8       ///< range 1-20bit. 8bit = 0-255 range
+
+/* --------------- SD CARD CFG  ---------------*/
+#define ENABLE_SD_CARD              false    ///< Enable SD card function
+#define SD_PIN_CLK                  14      ///< GPIO pin for SD card clock
+#define SD_PIN_CMD                  15      ///< GPIO pin for SD card command
+#define SD_PIN_DATA0                2       ///< GPIO pin for SD card data 0
+
+/* ---------- RESET CFG CONFIGURATION  ----------*/
+#define CFG_RESET_PIN               37      ///< GPIO 12 is for reset CFG to default
+#define CFG_RESET_LED_PIN           4       ///< GPIO for indication of reset CFG
+#define CFG_RESET_LED_LEVEL_ON      HIGH    ///< GPIO pin level for status LED ON
+
+/* -------------- STATUS LED CFG ----------------*/
+#define STATUS_LED_ENABLE           true    ///< enable/disable status LED
+#define STATUS_LED_GPIO_NUM         33      ///< GPIO pin for status LED
+#define STATUS_LED_OFF_PIN_LEVEL    LOW     ///< GPIO pin level for status LED ON
+
+/* -------------- DHT SENSOR CFG ----------------*/
+#define DHT_SENSOR_ENABLE           false   ///< enable/disable DHT sensor
+#define DHT_SENSOR_PIN              13      ///< GPIO pin for DHT sensor
+
+#endif  // M5STACK_TIMERCAMERA
+/* EOF */

ESP32_PrusaConnectCam/module_templates.h

@@ -14,7 +14,7 @@
 
 #include "mcu_cfg.h"
 
-#if ((AI_THINKER_ESP32_CAM + ESP32_WROVER_DEV + CAMERA_MODEL_ESP32_S3_DEV_CAM + CAMERA_MODEL_ESP32_S3_EYE_2_2 + CAMERA_MODEL_XIAO_ESP32_S3_CAM + CAMERA_MODEL_ESP32_S3_CAM + ESP32_S3_WROOM_FREENOVE) != 1)
+#if ((AI_THINKER_ESP32_CAM + ESP32_WROVER_DEV + CAMERA_MODEL_ESP32_S3_DEV_CAM + CAMERA_MODEL_ESP32_S3_EYE_2_2 + CAMERA_MODEL_XIAO_ESP32_S3_CAM + CAMERA_MODEL_ESP32_S3_CAM + ESP32_S3_WROOM_FREENOVE + M5STACK_TIMERCAMERA) != 1)
 #error "Exactly one camera model must be defined as true."
 #endif
 
@@ -39,6 +39,9 @@
 #elif (true == ESP32_S3_WROOM_FREENOVE)
 #include "module_ESP32-S3_Wroom_Freenove.h"
 
+#elif (true == M5STACK_TIMERCAMERA)
+#include "module_M5Stack_TimerCam.h"
+
 #else
 #error "No module selected"