/**
   @file module_ESP32-S3-CAM.h

   @brief Definition of the diymore esp32-s3-cam module

   @author Miroslav Pivovarsky
   Contact: miroslav.pivovarsky@gmail.com
   
   Board configuration in the arduino IDE 2.3.2
   Tools -> Board -> ESP32 Arduino -> ESP32S3 Dev Module
   Tools -> USB CDC on BOOT -> Disable
   Tools -> CPU Frequency -> 240MHz (WiFi/BT)
   Tools -> Core debug level -> None
   Tools -> USB DFU on BOOT -> Disable
   Tools -> Erase all Flash Before Sketch Upload -> Disable (first flash, new board = enable. otherwise = disable)
   Tools -> Events Run On -> Core 1
   Tools -> Flash Mode -> DIO 80MHz
   Tools -> Flash Size -> 16MB
   Tools -> Jtag Adapter -> Disable
   Tools -> Arduino Runs On -> Core 1
   Tools -> USB Firmware MSC On Boot -> Disable
   Tools -> Partition scheme -> Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
   Tools -> PSRAM -> OPI PSRAM
   Tools -> Upload Mode -> UART0 / Hardware CDC
   Tools -> Upload Speed -> 921600
   Tools -> USB Mode -> Hardware CDC and JTAG
   Tools -> Zigbee mode -> Disable

   @bug: 

*/

#pragma once

#include "mcu_cfg.h"

#ifdef CAMERA_MODEL_ESP32_S3_CAM

/* --------------- CAMERA CFG -------------------*/
#define PWDN_GPIO_NUM               -1      ///< Power down control pin
#define RESET_GPIO_NUM              -1      ///< Reset control pin
#define XCLK_GPIO_NUM                15     ///< External clock pin
#define SIOD_GPIO_NUM               4       ///< SCCB: SI/O data pin
#define SIOC_GPIO_NUM               5       ///< SCCB: SI/O control pin
#define Y9_GPIO_NUM                 16      ///< SCCB: Y9 pin
#define Y8_GPIO_NUM                 17      ///< SCCB: Y8 pin
#define Y7_GPIO_NUM                 18      ///< SCCB: Y7 pin
#define Y6_GPIO_NUM                 12      ///< SCCB: Y6 pin
#define Y5_GPIO_NUM                 10      ///< SCCB: Y5 pin
#define Y4_GPIO_NUM                 8       ///< SCCB: Y4 pin
#define Y3_GPIO_NUM                 9       ///< SCCB: Y3 pin
#define Y2_GPIO_NUM                 11      ///< SCCB: Y2 pin
#define VSYNC_GPIO_NUM              6       ///< Vertical sync pin
#define HREF_GPIO_NUM               7       ///< Line sync pin
#define PCLK_GPIO_NUM               13      ///< Pixel clock pin

/* ------------------ MCU CFG  ------------------*/
#define BOARD_NAME                  F("ESP32-S3-CAM") ///< Board name
#define ENABLE_BROWN_OUT_DETECTION  false    ///< Enable brown out detection
#define ENABLE_PSRAM                true     ///< Enable PSRAM   

/* --------------- OTA UPDATE CFG  --------------*/
#define OTA_UPDATE_FW_FILE          PSTR("esp32-s3-cam.bin") ///< OTA update firmware file name
#define FW_STATUS_LED_PIN           2      ///< GPIO pin for status FW update LED
#define FW_STATUS_LED_LEVEL_ON      HIGH   ///< GPIO pin level for status LED ON

/* --------------- FLASH LED CFG  ---------------*/
#define ENABLE_CAMERA_FLASH         true   ///< Enable camera flash function
#define CAMERA_FLASH_DIGITAL_CTRL   true   ///< Enable camera flash digital control
#define CAMERA_FLASH_PWM_CTRL       false  ///< Enable camera flash PWM control
#define CAMERA_FLASH_NEOPIXEL       true   ///< Enable camera flash NeoPixel control
#define FLASH_GPIO_NUM              47     ///< Flash control pin.
#define FLASH_NEOPIXEL_LED_PIN      48     ///< External flash control pin. RGB LED NeoPixel
#define FLASH_OFF_STATUS            LOW    ///< value for turn off flash
#define FLASH_ON_STATUS             HIGH   ///< value for turn on flash
//#define FLASH_PWM_FREQ              2000    ///< frequency of pwm [240MHz / (100 prescale * pwm cycles)] = frequency
//#define FLASH_PWM_CHANNEL           0       ///< channel 0
//#define FLASH_PWM_RESOLUTION        8       ///< range 1-20bit. 8bit = 0-255 range

/* --------------- SD CARD CFG  ---------------*/
#define ENABLE_SD_CARD              true    ///< Enable SD card function
#define SD_PIN_CLK                  39      ///< GPIO pin for SD card clock
#define SD_PIN_CMD                  38      ///< GPIO pin for SD card command
#define SD_PIN_DATA0                40      ///< GPIO pin for SD card data 0

/* ---------- RESET CFG CONFIGURATION  ----------*/
#define CFG_RESET_PIN               14      ///< GPIO 16 is for reset CFG to default
#define CFG_RESET_LED_PIN           2       ///< GPIO for indication of reset CFG
#define CFG_RESET_LED_LEVEL_ON      HIGH    ///< GPIO pin level for status LED ON

/* -------------- STATUS LED CFG ----------------*/
#define STATUS_LED_ENABLE           true    ///< enable/disable status LED
#define STATUS_LED_GPIO_NUM         2      ///< GPIO pin for status LED
#define STATUS_LED_OFF_PIN_LEVEL    HIGH     ///< GPIO pin level for status LED ON

/* -------------- DHT SENSOR CFG ----------------*/
#define DHT_SENSOR_ENABLE           true   ///< enable/disable DHT sensor
#define DHT_SENSOR_PIN              20     ///< GPIO pin for DHT sensor

#endif
/* EOF */