103 lines
5.1 KiB
C
103 lines
5.1 KiB
C
/**
|
|
@file module_ESP32-S3-EYE_2_2.h
|
|
|
|
@brief Definition of the ESP32-S3 EYE 2.2 module
|
|
|
|
@author Miroslav Pivovarsky
|
|
Contact: miroslav.pivovarsky@gmail.com
|
|
|
|
Board configuration in the arduino IDE 2.3.2
|
|
Tools -> Board -> ESP32 Arduino -> ESP32S3 Dev Module
|
|
Tools -> USB CDC on BOOT -> Enabled
|
|
Tools -> CPU Frequency -> 240MHz (WiFi/BT)
|
|
Tools -> Core debug level -> None
|
|
Tools -> USB DFU on BOOT -> Disable
|
|
Tools -> Erase all Flash Before Sketch Upload -> Disable (first flash, new board = enable. otherwise = disable)
|
|
Tools -> Events Run On -> Core 0
|
|
Tools -> Flash Mode -> DIO 80MHz
|
|
Tools -> Flash Size -> 8MB
|
|
Tools -> Jtag Adapter -> Disable
|
|
Tools -> Arduino Runs On -> Core 0
|
|
Tools -> USB Firmware MSC On Boot -> Disable
|
|
Tools -> Partition scheme -> Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
Tools -> PSRAM -> OPI PSRAM
|
|
Tools -> Upload Mode -> USB-OTG CDC (TinyUSB)
|
|
Tools -> Upload Speed -> 921600
|
|
Tools -> USB Mode -> Hardware CDC and JTAG
|
|
Tools -> Zigbee mode -> Disable
|
|
|
|
https://github.com/espressif/esp-who/blob/master/docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md
|
|
|
|
@bug: Currently SW don't work with this DEV board
|
|
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include "mcu_cfg.h"
|
|
|
|
#ifdef CAMERA_MODEL_ESP32_S3_EYE_2_2
|
|
|
|
/* --------------- CAMERA CFG -------------------*/
|
|
#define PWDN_GPIO_NUM -1 ///< Power down control pin
|
|
#define RESET_GPIO_NUM -1 ///< Reset control pin
|
|
#define SIOD_GPIO_NUM 4 ///< SCCB: SI/O data pin
|
|
#define SIOC_GPIO_NUM 5 ///< SCCB: SI/O control pin
|
|
#define Y2_GPIO_NUM 11 ///< SCCB: Y2 pin
|
|
#define Y3_GPIO_NUM 9 ///< SCCB: Y3 pin
|
|
#define Y4_GPIO_NUM 8 ///< SCCB: Y4 pin
|
|
#define Y5_GPIO_NUM 10 ///< SCCB: Y5 pin
|
|
#define Y6_GPIO_NUM 12 ///< SCCB: Y6 pin
|
|
#define Y7_GPIO_NUM 18 ///< SCCB: Y7 pin
|
|
#define Y8_GPIO_NUM 17 ///< SCCB: Y8 pin
|
|
#define Y9_GPIO_NUM 16 ///< SCCB: Y9 pin
|
|
#define VSYNC_GPIO_NUM 6 ///< Vertical sync pin
|
|
#define HREF_GPIO_NUM 7 ///< Line sync pin
|
|
#define PCLK_GPIO_NUM 13 ///< Pixel clock pin
|
|
#define XCLK_GPIO_NUM 15 ///< External clock pin
|
|
|
|
/* ------------------ MCU CFG ------------------*/
|
|
#define BOARD_NAME F("ESP32-S3-EYE_2.2") ///< Board name
|
|
#define ENABLE_BROWN_OUT_DETECTION false ///< Enable brown out detection
|
|
#define ENABLE_PSRAM true ///< Enable PSRAM
|
|
|
|
/* --------------- OTA UPDATE CFG --------------*/
|
|
#define OTA_UPDATE_FW_FILE PSTR("ESP32S3_EYE22.bin") ///< OTA update firmware file name
|
|
#define FW_STATUS_LED_PIN 3 ///< GPIO pin for status FW update LED
|
|
#define FW_STATUS_LED_LEVEL_ON LOW ///< GPIO pin level for status LED ON
|
|
|
|
/* --------------- FLASH LED CFG ---------------*/
|
|
#define ENABLE_CAMERA_FLASH true ///< Enable camera flash function
|
|
#define CAMERA_FLASH_DIGITAL_CTRL true ///< Enable camera flash digital control
|
|
#define CAMERA_FLASH_PWM_CTRL false ///< Enable camera flash PWM control
|
|
#define CAMERA_FLASH_NEOPIXEL false ///< Enable camera flash NeoPixel control
|
|
#define FLASH_GPIO_NUM 48 ///< Flash control pin. This is pin for enable LCD backlight
|
|
#define FLASH_NEOPIXEL_LED_PIN -1 ///< External flash control pin. RGB LED NeoPixel
|
|
#define FLASH_OFF_STATUS LOW ///< Value for turn off flash
|
|
#define FLASH_ON_STATUS HIGH ///< Value for turn on flash
|
|
//#define FLASH_PWM_FREQ 2000 ///< frequency of pwm [240MHz / (100 prescale * pwm cycles)] = frequency
|
|
//#define FLASH_PWM_CHANNEL 0 ///< channel 0
|
|
//#define FLASH_PWM_RESOLUTION 8 ///< range 1-20bit. 8bit = 0-255 range
|
|
|
|
/* --------------- SD CARD CFG ---------------*/
|
|
#define ENABLE_SD_CARD true ///< Enable SD card function
|
|
#define SD_PIN_CLK 39 ///< GPIO pin for SD card clock
|
|
#define SD_PIN_CMD 38 ///< GPIO pin for SD card command
|
|
#define SD_PIN_DATA0 40 ///< GPIO pin for SD card data 0
|
|
|
|
/* ---------- RESET CFG CONFIGURATION ----------*/
|
|
#define CFG_RESET_PIN 1 ///< GPIO 1 is for reset CFG to default. This is button UP+`
|
|
#define CFG_RESET_LED_PIN 3 ///< GPIO for indication of reset CFG
|
|
#define CFG_RESET_LED_LEVEL_ON LOW ///< GPIO pin level for status LED ON
|
|
|
|
/* -------------- STATUS LED CFG ----------------*/
|
|
#define STATUS_LED_ENABLE true ///< enable/disable status LED
|
|
#define STATUS_LED_GPIO_NUM 3 ///< GPIO pin for status LED
|
|
#define STATUS_LED_OFF_PIN_LEVEL HIGH ///< GPIO pin level for status LED ON
|
|
|
|
/* -------------- DHT SENSOR CFG ----------------*/
|
|
#define DHT_SENSOR_ENABLE true ///< enable/disable DHT sensor
|
|
#define DHT_SENSOR_PIN 46 ///< GPIO pin for DHT sensor
|
|
|
|
#endif // CAMERA_MODEL_ESP32_S3_EYE_2_2
|
|
/* EOF */ |