89 lines
4.1 KiB
C
89 lines
4.1 KiB
C
/**
|
|
@file module_ESP32-WROVER-DEV.h
|
|
|
|
@brief Definition of the ESP32-S3 DEV CAM module
|
|
|
|
@author Miroslav Pivovarsky
|
|
Contact: miroslav.pivovarsky@gmail.com
|
|
|
|
Board configuration in the arduino IDE 2.3.2
|
|
Tools -> Board -> ESP32 Arduino -> ESP32S3 Dev Module
|
|
Tools -> USB CDC on BOOT -> Enabled
|
|
Tools -> CPU Frequency -> 240MHz (WiFi/BT)
|
|
Tools -> Core debug level -> None
|
|
Tools -> USB DFU on BOOT -> Disable
|
|
Tools -> Events Run On -> Core 1
|
|
Tools -> Flash Mode -> DIO 80MHz
|
|
Tools -> Flash Size -> 16MB
|
|
Tools -> Jtag Adapter -> Disable
|
|
Tools -> Arduino Runs On -> Core 1
|
|
Tools -> USB Firmware MSC On Boot -> Disable
|
|
Tools -> Partition scheme -> Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
Tools -> PSRAM -> QSPI PSRAM
|
|
Tools -> Upload Mode -> UART0 / Hardware CDC
|
|
Tools -> Upload Speed -> 921600
|
|
Tools -> USB Mode -> Hardware CDC & JTAG
|
|
Tools -> Zigbee mode -> Disable
|
|
|
|
Left USB-C connector is for programming and serial monitor
|
|
|
|
@bug: Currently SW don't work with this DEV board. WiFi and MicroSD is not working
|
|
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include "mcu_cfg.h"
|
|
|
|
#ifdef CAMERA_MODEL_ESP32_S3_CAM
|
|
|
|
/* --------------- CAMERA CFG -------------------*/
|
|
#define PWDN_GPIO_NUM -1 ///< Power down control pin
|
|
#define RESET_GPIO_NUM -1 ///< Reset control pin
|
|
#define XCLK_GPIO_NUM 10 ///< External clock pin
|
|
#define SIOD_GPIO_NUM 21 ///< SCCB: SI/O data pin
|
|
#define SIOC_GPIO_NUM 14 ///< SCCB: SI/O control pin
|
|
#define Y9_GPIO_NUM 11 ///< SCCB: Y9 pin
|
|
#define Y8_GPIO_NUM 9 ///< SCCB: Y8 pin
|
|
#define Y7_GPIO_NUM 8 ///< SCCB: Y7 pin
|
|
#define Y6_GPIO_NUM 6 ///< SCCB: Y6 pin
|
|
#define Y5_GPIO_NUM 4 ///< SCCB: Y5 pin
|
|
#define Y4_GPIO_NUM 2 ///< SCCB: Y4 pin
|
|
#define Y3_GPIO_NUM 3 ///< SCCB: Y3 pin
|
|
#define Y2_GPIO_NUM 5 ///< SCCB: Y2 pin
|
|
#define VSYNC_GPIO_NUM 13 ///< Vertical sync pin
|
|
#define HREF_GPIO_NUM 12 ///< Line sync pin
|
|
#define PCLK_GPIO_NUM 7 ///< Pixel clock pin
|
|
|
|
/* ------------------ MCU CFG ------------------*/
|
|
#define ENABLE_BROWN_OUT_DETECTION false ///< Enable brown out detection
|
|
#define ENABLE_PSRAM true ///< Enable PSRAM
|
|
|
|
/* --------------- OTA UPDATE CFG --------------*/
|
|
#define OTA_UPDATE_FW_FILE PSTR("ESP32_S3_CAM_PrusaConnectCam.ino.bin") ///< OTA update firmware file name
|
|
|
|
/* --------------- FLASH LED CFG ---------------*/
|
|
#define ENABLE_CAMERA_FLASH false ///< Enable camera flash function
|
|
#define FLASH_GPIO_NUM 4 ///< Flash control pin
|
|
#define FLASH_OFF_STATUS 0 ///< PWM intensity LED for OFF. 0-2^FLASH_PWM_RESOLUTION = 0-255
|
|
#define FLASH_ON_STATUS 205 ///< PWM intensity LED for ON. limitation to 80%. 2^FLASH_PWM_RESOLUTION * 0.8% = 204
|
|
#define FLASH_PWM_FREQ 2000 ///< frequency of pwm [240MHz / (100 prescale * pwm cycles)] = frequency
|
|
#define FLASH_PWM_CHANNEL 0 ///< channel 0
|
|
#define FLASH_PWM_RESOLUTION 8 ///< range 1-20bit. 8bit = 0-255 range
|
|
|
|
/* --------------- SD CARD CFG ---------------*/
|
|
#define ENABLE_SD_CARD true ///< Enable SD card function
|
|
#define SD_PIN_CLK 42 ///< GPIO pin for SD card clock
|
|
#define SD_PIN_CMD 39 ///< GPIO pin for SD card command
|
|
#define SD_PIN_DATA0 41 ///< GPIO pin for SD card data 0
|
|
|
|
/* ---------- RESET CFG CONFIGURATION ----------*/
|
|
#define CFG_RESET_PIN 2 ///< GPIO 16 is for reset CFG to default
|
|
|
|
/* -------------- STATUS LED CFG ----------------*/
|
|
#define STATUS_LED_ENABLE true ///< enable/disable status LED
|
|
#define STATUS_LED_GPIO_NUM 34 ///< GPIO pin for status LED
|
|
#define STATUS_LED_OFF_PIN_LEVEL LOW ///< GPIO pin level for status LED ON
|
|
|
|
#endif // ESP32_WROVER_DEV
|
|
/* EOF */ |