105 lines
5.0 KiB
C
105 lines
5.0 KiB
C
/**
|
|
@file module_XIAO_ESP32-S3-cam.h
|
|
|
|
@brief Definition of the XIAO ESP32-S3 sense cam
|
|
|
|
@author Miroslav Pivovarsky
|
|
Contact: miroslav.pivovarsky@gmail.com
|
|
|
|
https://www.seeedstudio.com/XIAO-ESP32S3-Sense-p-5639.html
|
|
https://wiki.seeedstudio.com/xiao_esp32s3_getting_started/
|
|
https://github.com/limengdu/SeeedStudio-XIAO-ESP32S3-Sense-camera
|
|
https://github.com/Seeed-Studio/XIAO_Series
|
|
|
|
|
|
Board configuration in the arduino IDE 2.3.2
|
|
Tools -> Board -> ESP32 Arduino -> XIAO_ESP32S3
|
|
Tools -> USB CDC on BOOT -> Enabled
|
|
Tools -> CPU Frequency -> 240MHz (WiFi)
|
|
Tools -> Core debug level -> None
|
|
Tools -> USB DFU on BOOT -> Disable
|
|
Tools -> Erase all Flash Before Sketch Upload -> Disable (first flash, new board = enable. otherwise = disable)
|
|
Tools -> Events Run On -> Core 1
|
|
Tools -> Flash Mode -> QIO 80MHz
|
|
Tools -> Flash Size -> 8MB
|
|
Tools -> Jtag Adapter -> Disable
|
|
Tools -> Arduino Runs On -> Core 1
|
|
Tools -> USB Firmware MSC On Boot -> Disable
|
|
Tools -> Partition scheme -> 3MB APP/1.5MB SPIFFS
|
|
Tools -> PSRAM -> OPI PSRAM
|
|
Tools -> Upload Mode -> UART0 / Hardware CDC
|
|
Tools -> Upload Speed -> 921600
|
|
Tools -> USB Mode -> Hardware CDC and JTAG
|
|
|
|
@bug:
|
|
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include "mcu_cfg.h"
|
|
|
|
#ifdef CAMERA_MODEL_XIAO_ESP32_S3_CAM
|
|
|
|
/* --------------- CAMERA CFG -------------------*/
|
|
#define PWDN_GPIO_NUM -1 ///< Power down control pin
|
|
#define RESET_GPIO_NUM -1 ///< Reset control pin
|
|
#define SIOD_GPIO_NUM 40 ///< SCCB: SI/O data pin
|
|
#define SIOC_GPIO_NUM 39 ///< SCCB: SI/O control pin
|
|
#define Y2_GPIO_NUM 15 ///< SCCB: Y2 pin
|
|
#define Y3_GPIO_NUM 17 ///< SCCB: Y3 pin
|
|
#define Y4_GPIO_NUM 18 ///< SCCB: Y4 pin
|
|
#define Y5_GPIO_NUM 16 ///< SCCB: Y5 pin
|
|
#define Y6_GPIO_NUM 14 ///< SCCB: Y6 pin
|
|
#define Y7_GPIO_NUM 12 ///< SCCB: Y7 pin
|
|
#define Y8_GPIO_NUM 11 ///< SCCB: Y8 pin
|
|
#define Y9_GPIO_NUM 48 ///< SCCB: Y9 pin
|
|
#define VSYNC_GPIO_NUM 38 ///< Vertical sync pin
|
|
#define HREF_GPIO_NUM 47 ///< Line sync pin
|
|
#define PCLK_GPIO_NUM 13 ///< Pixel clock pin
|
|
#define XCLK_GPIO_NUM 10 ///< External clock pin
|
|
|
|
/* ------------------ MCU CFG ------------------*/
|
|
#define BOARD_NAME F("XIAO ESP32-S3 Sense cam") ///< Board name
|
|
#define ENABLE_BROWN_OUT_DETECTION false ///< Enable brown out detection
|
|
#define ENABLE_PSRAM true ///< Enable PSRAM
|
|
|
|
/* --------------- OTA UPDATE CFG --------------*/
|
|
#define OTA_UPDATE_FW_FILE PSTR("XIAO_ESP32S3.bin") ///< OTA update firmware file name
|
|
#define FW_STATUS_LED_PIN 21 ///< GPIO pin for status FW update LED
|
|
#define FW_STATUS_LED_LEVEL_ON LOW ///< GPIO pin level for status LED ON
|
|
|
|
/* --------------- FLASH LED CFG ---------------*/
|
|
#define ENABLE_CAMERA_FLASH true ///< Enable camera flash function
|
|
#define CAMERA_FLASH_DIGITAL_CTRL true ///< Enable camera flash digital control
|
|
#define CAMERA_FLASH_PWM_CTRL false ///< Enable camera flash PWM control
|
|
#define FLASH_GPIO_NUM 4 ///< Flash control pin. This is pin for enable LCD backlight
|
|
#define FLASH_OFF_STATUS LOW ///< value for flash OFF
|
|
#define FLASH_ON_STATUS HIGH ///< value for flash ON
|
|
//#define FLASH_PWM_FREQ 2000 ///< frequency of pwm [240MHz / (100 prescale * pwm cycles)] = frequency
|
|
//#define FLASH_PWM_CHANNEL 0 ///< channel 0
|
|
//#define FLASH_PWM_RESOLUTION 8 ///< range 1-20bit. 8bit = 0-255 range
|
|
|
|
/* --------------- SD CARD CFG ---------------*/
|
|
#define ENABLE_SD_CARD true ///< Enable SD card function
|
|
#define SD_PIN_CLK 7 ///< GPIO pin for SD card clock
|
|
#define SD_PIN_CMD 9 ///< GPIO pin for SD card command
|
|
#define SD_PIN_DATA0 8 ///< GPIO pin for SD card data 0
|
|
|
|
/* ---------- RESET CFG CONFIGURATION ----------*/
|
|
#define CFG_RESET_PIN 2 ///< GPIO 1 is for reset CFG to default. This is button UP+`
|
|
#define CFG_RESET_LED_PIN 21 ///< GPIO for indication of reset CFG
|
|
#define CFG_RESET_LED_LEVEL_ON LOW ///< GPIO pin level for status LED ON
|
|
|
|
/* -------------- STATUS LED CFG ----------------*/
|
|
#define STATUS_LED_ENABLE true ///< enable/disable status LED
|
|
#define STATUS_LED_GPIO_NUM 21 ///< GPIO pin for status LED
|
|
#define STATUS_LED_OFF_PIN_LEVEL LOW ///< GPIO pin level for status LED ON
|
|
|
|
/* -------------- DHT SENSOR CFG ----------------*/
|
|
#define DHT_SENSOR_ENABLE true ///< enable/disable DHT sensor
|
|
#define DHT_SENSOR_PIN 1 ///< GPIO pin for DHT sensor
|
|
|
|
#endif // CAMERA_MODEL_XIAO_ESP32_S3_CAM
|
|
/* EOF */
|