Add cutLength register (0x23)

src/logic/cut_filament.cpp

@@ -94,7 +94,7 @@ bool CutFilament::StepInner() {
     case ProgressCode::PreparingBlade:
         if (ms::selector.Slot() == cutSlot + 1) {
             state = ProgressCode::PushingFilament;
-            mpu::pulley.PlanMove(config::cutLength + config::cuttingEdgeRetract, config::pulleySlowFeedrate);
+            mpu::pulley.PlanMove(mg::globals.CutLength() + config::cuttingEdgeRetract, config::pulleySlowFeedrate);
         }
         break;
     case ProgressCode::PushingFilament:

src/modules/globals.cpp

@@ -36,6 +36,7 @@ void Globals::Init() {
     ResetIdlerHomingFeedrate();
 
     ResetCutIRunCurrent();
+    ResetCutLength();
 }
 
 uint8_t Globals::ActiveSlot() const {

src/modules/globals.h

@@ -109,6 +109,10 @@ public:
     void ResetCutIRunCurrent() { cutIRunCurrent = config::selectorCutIRun; }
     void SetCutIRunCurrent(uint8_t v) { cutIRunCurrent = v; }
 
+    config::U_mm CutLength() const { return config::U_mm({ (long double)cutLength_mm }); }
+    void ResetCutLength() { cutLength_mm = config::cutLength.v; }
+    void SetCutLength(uint8_t v) { cutLength_mm = v; }
+
 private:
     /// Sets the active slot, usually after some command/operation.
     /// Also updates the EEPROM records accordingly
@@ -132,6 +136,7 @@ private:
     uint16_t idlerHomingFeedrate_deg_s;
 
     uint8_t cutIRunCurrent;
+    uint8_t cutLength_mm;
 };
 
 /// The one and only instance of global state variables

src/registers.cpp

@@ -166,6 +166,7 @@
 | 0x20h 32 | uint16   | Set/Get Idler iRun current | 0-31         | 1fh 31      | 31->530mA: see TMC2130 current conversion| Read / Write | M707 A0x20 | M708 A0x20 Xn
 | 0x21h 33 | uint16   | Reserved for internal use  | 225          |             | N/A                                      | N/A          | N/A        | N/A
 | 0x22h 34 | uint16   | Bowden length              | 341-1000     | 168h 360    | unit mm                                  | Read / Write Persistent | M707 A0x22 | M708 A0x22 Xn
+| 0x23h 35 | uint8    | Cut length                 | 0-255        | 8           | unit mm                                  | Read / Write | M707 A0x23 | M708 A0x23 Xn
 */
 
 struct __attribute__((packed)) RegisterFlags {
@@ -437,10 +438,16 @@ static const RegisterRec registers[] PROGMEM = {
         []() -> uint16_t { return mps::BowdenLength::Get(); },
         [](uint16_t d) { mps::BowdenLength::Set(d); },
         2),
+
+    // 0x23 Cut length
+    RegisterRec(
+        []() -> uint16_t { return mg::globals.CutLength().v; },
+        [](uint16_t d) { mg::globals.SetCutLength(d); },
+        2),
 };
 
 static constexpr uint8_t registersSize = sizeof(registers) / sizeof(RegisterRec);
-static_assert(registersSize == 35);
+static_assert(registersSize == 36);
 
 bool ReadRegister(uint8_t address, uint16_t &value) {
     if (address >= registersSize) {