317 lines
16 KiB
Markdown
317 lines
16 KiB
Markdown
|
||
|
||
|
||
# Integrates your Sencor SWS 12500, SWS16600, SWS 10500, GARNI, BRESSER weather stations seamlessly into Home Assistant
|
||
|
||
This integration will listen for data from your station and passes them to respective sensors. It also provides the ability to push data to `Windy API` or `Pocasi Meteo`.
|
||
|
||
### Ecowitt support
|
||
|
||
Ecowitt stations are supported as of the pre-release version
|
||
[v2.0.0pre1](https://github.com/schizza/SWS-12500-custom-component/releases/tag/v2.0.0pre1).
|
||
You can download this pre-release in HACS under `target version`, where you can pick the exact
|
||
version of the integration. Please be aware that this pre-release is really for testing
|
||
purposes only.
|
||
|
||
See [Ecowitt stations](#ecowitt-stations) for the setup steps.
|
||
|
||
---
|
||
|
||
### Integration rename is planned for the next major release
|
||
|
||
The current name no longer reflects what the integration does. It was initially developed
|
||
primarily for the SWS 12500 station, but it already supports other weather stations as well
|
||
(Bresser, Garni, Ecowitt and others) — so the current name has become misleading. The
|
||
transition will be announced via an update, and I'm also planning to offer a full data
|
||
migration from the existing integration to the new one, so you won't lose any of your
|
||
historical data.
|
||
|
||
- The transition date hasn't been set yet, but it's currently expected to happen within the
|
||
next ~2–3 months. At the moment, I'm working on a full refactor and general code cleanup.
|
||
Looking further ahead, the goal is to have the integration fully incorporated into Home
|
||
Assistant as a native component — meaning it won't need to be installed via HACS but will
|
||
become part of the official Home Assistant distribution.
|
||
|
||
- I'm also looking for someone who owns an Ecowitt weather station and would be willing to
|
||
help with testing the integration for these devices.
|
||
|
||
---
|
||
|
||
## Warning — WSLink app (applies also to SWS 12500 with firmware > 3.0)
|
||
|
||
Please read the **IMPORTANT** note below.
|
||
|
||
For stations that use the WSLink app to set up the station and the WSLink API for resending
|
||
data (also SWS 12500 stations manufactured in 2024 or later), you will need to install the
|
||
[WSLink SSL proxy add-on](https://github.com/schizza/wslink-addon) into your Home Assistant
|
||
— unless you are already running Home Assistant in SSL mode or you have your own SSL proxy
|
||
in front of Home Assistant.
|
||
|
||
---
|
||
|
||
> [!IMPORTANT]
|
||
> The recommendation above does not apply to all stations. As is known by now, some stations
|
||
> — even when configured via the `WSLink App` — do not use the `WSLink protocol` to send
|
||
> data to custom servers. It can therefore be confusing how to configure your station, and
|
||
> for that case I made a simple debugging server (see below).
|
||
|
||
## Not Sure How Your Station Sends Data?
|
||
|
||
If you are struggling with configuration and don't know which protocol your station uses (`WSLink` or `PWS/WU`), or whether it sends data over SSL or plain HTTP — use our public test server:
|
||
|
||
**<https://test-station.schizza.cz>**
|
||
|
||
1. Open the link above and create a new session.
|
||
2. Point your weather station to the generated subdomain address.
|
||
3. Within a few seconds the server will show you:
|
||
- the **protocol** your station is using (`WSLink` or `PWS/WU`)
|
||
- whether the request arrived over **SSL** or **non-SSL**
|
||
- the full query string, headers, and payload your station sent
|
||
|
||
This information tells you exactly how to configure the integration in Home Assistant.
|
||
|
||
### Quick Recommendations
|
||
|
||
| Station sends via | Protocol | Recommended Setup |
|
||
|---|---|--- |
|
||
| **plain HTTP** | PWS/WU | Point the station directly at Home Assistant — no proxy needed. Keep `WSLink API` unchecked (disabled). |
|
||
| **plain HTTP** | WSLink | Point the station directly at Home Assistant — no proxy needed. Enable `WSLink API` in settings. |
|
||
| **HTTPS (SSL)** | PWS/WU | Install the [WSLink Proxy Add-on](https://github.com/schizza/wslink-addon) — it terminates TLS and forwards plain HTTP to Home Assistant. Keep `WSLink API` unchecked (disabled). |
|
||
| **HTTPS (SSL)** | WSLink | Install the [WSLink Proxy Add-on](https://github.com/schizza/wslink-addon) — it terminates TLS and forwards plain HTTP to Home Assistant, and enable `WSLink API`. |
|
||
|
||
— If the test server shows your station is sending over SSL, you need the [WSLink Proxy Add-on](https://github.com/schizza/wslink-addon). If it sends plain HTTP, you can connect directly.
|
||
|
||
Web server repo is reachable here: <https://github.com/schizza/test-station-server>
|
||
|
||
## Requirements
|
||
|
||
- Weather station that supports sending data to custom server in their API [(list of supported stations.)](#list-of-supported-stations)
|
||
- Configure station to send data directly to Home Assistant.
|
||
- If you want to push data to Windy, you have to create an account at [Windy](https://stations.windy.com).
|
||
- If you want to resend data to `Pocasi Meteo`, you have to create accout at [Pocasi Meteo](https://pocasimeteo.cz)
|
||
|
||
## Examples of supported stations
|
||
|
||
- [Sencor SWS 12500 Weather Station](https://www.sencor.cz/profesionalni-meteorologicka-stanice/sws-12500)
|
||
- [Sencor SWS 16600 WiFi SH](https://www.sencor.cz/meteorologicka-stanice/sws-16600)
|
||
- SWS 10500 (newer firmware revisions are also supported via the [WSLink SSL proxy add-on](https://github.com/schizza/wslink-addon))
|
||
- Bresser stations that support custom server upload — [this model is known to work](https://www.bresser.com/p/bresser-wi-fi-clearview-weather-station-with-7-in-1-sensor-7002586), for example
|
||
- Garni stations with WSLink support or custom server support
|
||
- Ecowitt stations that support the `Customized` / `Ecowitt` upload protocol — see
|
||
[Ecowitt stations](#ecowitt-stations)
|
||
- and a bunch of other models that aren't listed here are also supported
|
||
|
||
## Supported sensors
|
||
|
||
The integration auto-creates sensors as soon as the station first sends data for them — new
|
||
sensors trigger a notification in Home Assistant and are added to the entity list
|
||
automatically.
|
||
|
||
Beyond the standard set (outdoor / indoor temperature and humidity, barometric pressure,
|
||
wind speed / direction / gust, rain rate and daily / weekly / monthly / yearly totals, dew
|
||
point, UV index, solar irradiance) the WSLink protocol also exposes:
|
||
|
||
- additional channels **CH2** – **CH8** for temperature and humidity
|
||
- **WBGT** index, **heat index**, **wind chill**
|
||
- sensor battery state for the outdoor, indoor and **CH2** – **CH8** probes, exposed as
|
||
binary `battery` sensors (`normal` / `low`) — these used to be regular sensors, so on an
|
||
upgraded install the old entities are left behind; a `Repairs` issue lists them and
|
||
tells you how to remove them
|
||
- **Formaldehyde (HCHO)** in ppb and **VOC level** from the WH46 / 7-in-1 air-quality
|
||
combo sensor, reported as a named air-quality level (`unhealthy`, `poor`, `moderate`,
|
||
`good`, `excellent` — the station's 1–5 index, where 1 is worst)
|
||
- **HCHO/VOC sensor battery** reported as a percentage
|
||
|
||
HCHO / VOC entities are only created when the station reports the air-quality module as
|
||
connected (`t9cn = 1`), so they don't clutter the device when no such sensor is attached.
|
||
|
||
Ecowitt stations map onto the same standard set and additionally report whatever their own
|
||
firmware sends — absolute pressure, event / hourly / weekly / monthly / yearly / total /
|
||
24h rain, feels-like temperature, indoor dew point and CO₂ readings among them. Only the
|
||
fields your station actually sends are created.
|
||
|
||
The integration also creates diagnostic entities describing its own state — the active
|
||
protocol, whether each endpoint is registered, details of the last received payload, the
|
||
status of the WSLink proxy add-on, and the state of the Windy / Pocasi Meteo forwarders.
|
||
They are grouped under `Diagnostic` on the device page, and the same data is included in
|
||
the config entry's `Download diagnostics` file.
|
||
|
||
## Installation
|
||
|
||
### For stations that send data through WSLink API
|
||
|
||
Make sure you have your Home Assistant configured in SSL mode or use [WSLink SSL proxy addon](https://github.com/schizza/wslink-addon) to bypass SSL configuration of whole Home Assistant.
|
||
|
||
### HACS installation
|
||
|
||
For installation with HACS, you have to first add a [custom repository](https://hacs.xyz/docs/faq/custom_repositories/).
|
||
You will need to enter the URL of this repository when prompted: `https://github.com/schizza/SWS-12500-custom-component`.
|
||
|
||
After adding this repository to HACS:
|
||
|
||
- Go to HACS -> Integrations
|
||
- Search for the integration `Sencor SWS 12500 Weather station` and download the integration.
|
||
- Restart Home Assistant
|
||
- Now go to `Integrations` and add new integration. Search for `Sencor SWS 12500 Weather station` and select it.
|
||
|
||
### Manual installation
|
||
|
||
For manual installation you must have access to your Home Assistant's `/config` folder.
|
||
|
||
- Clone this repository or download the [latest release here](https://github.com/schizza/SWS-12500-custom-component/releases/latest).
|
||
|
||
- Copy the `custom_components/sws12500` folder to your `config/custom_components` folder in Home Assistant.
|
||
- Restart Home Assistant.
|
||
- Now go to `Integrations` and add new integration `Sencor SWS 12500 Weather station`
|
||
|
||
## Configure your station in AP mode
|
||
|
||
> This configuration example is for Sencor SWS12500 with FW < 3.0
|
||
|
||
> For WSLink read [this notes.](#wslink-notes)
|
||
|
||
1. Hold the Wi-Fi button on the back of the station for 6 seconds until the AP will flash on the display.
|
||
2. Select your station from available APs on your computer.
|
||
3. Connect to the station's setup page: `http://192.168.1.1` from your browser.
|
||
4. In the third URL section fill in the address to your local Home Assistant installation.
|
||
5. Create new `ID` and `KEY`. You can use [online tool](https://randomkeygen.com) to generate random keys. _(you will need them to configure integration to Home Assistant)_
|
||
6. Save your configuration.
|
||
|
||
|
||
Once the integration is added to Home Assistant, the first dialog asks which type of
|
||
station you have. Choose `PWS/WSLink (Sencor, Garni, Bresser, other - Weather Underground
|
||
compatible)` — for Ecowitt stations see [Ecowitt stations](#ecowitt-stations) instead.
|
||
|
||
The next dialog asks for `API_ID` and `API_KEY` as you set them in your station:
|
||
|
||
```plain
|
||
API_ID: ID in station's config
|
||
API_KEY: PASSWORD in station's config
|
||
```
|
||
|
||
|
||
|
||
If you change `API ID` or `API KEY` in the station, you have to reconfigure integration to accept data from your station.
|
||
|
||
- In `Settings` -> `Devices & services` find SWS12500 and click `Configure`.
|
||
- In dialog box choose `Basic - configure credentials for Weather Station`
|
||
|
||
|
||
|
||
As soon as the integration is added into Home Assistant it will listen for incoming data from the station and starts to fill sensors as soon as data will first arrive.
|
||
|
||
## Ecowitt stations
|
||
|
||
Ecowitt stations do not use the `API ID` / `API KEY` pair — they are authorized by a
|
||
secret webhook ID that the integration generates for you.
|
||
|
||
- When adding the integration, pick `Ecowitt` in the station-type dialog. For an entry
|
||
that already exists, go to `Settings` -> `Devices & services` -> SWS12500 ->
|
||
`Configure` and choose `Ecowitt configuration`.
|
||
- The dialog shows the endpoint your station has to post to and pre-fills a freshly
|
||
generated webhook ID:
|
||
|
||
```plain
|
||
<your Home Assistant host>:<port>/weatherhub/<webhook_id>
|
||
```
|
||
|
||
- Enter that path as the custom-server path in the Ecowitt app (`WS View` / `Customized`
|
||
upload), keep the protocol on `Ecowitt`, and tick `Enable Ecowitt station data`.
|
||
|
||
> [!IMPORTANT]
|
||
> The legacy PWS/WSLink endpoint and the Ecowitt endpoint cannot be enabled at the same
|
||
> time — both feed the same sensor entities, which would mix up units and blank out
|
||
> readings. The config flow refuses to enable one while the other is on. Picking
|
||
> `Ecowitt` when you first add the integration turns the legacy endpoint off for you; to
|
||
> switch back, disable Ecowitt first and then tick `Enable PWS/WSLink endpoint` under
|
||
> `Basic - configure credentials for Weather Station`.
|
||
|
||
## Upgrading from PWS to WSLink
|
||
|
||
If you upgrade your station — which was previously sending data in the PWS protocol — to a
|
||
station that uses the WSLink protocol, you have to remove the integration and reinstall it.
|
||
The WSLink protocol uses the metric scale instead of the imperial scale used in PWS, and
|
||
deleting and reinstalling the integration makes sure the sensors are aware of the change of
|
||
measurement scale.
|
||
|
||
- because sensor unique IDs stay the same, you will not lose any of your historical data
|
||
|
||
## Resending data to Windy API
|
||
|
||
- First of all you need to create account at [Windy stations](https://stations.windy.com).
|
||
- Once you have an account created, open
|
||
[your stations](https://stations.windy.com/stations) and copy the **station ID** and the
|
||
**station password** of the station you want to feed.
|
||
|
||
|
||
- In `Settings` -> `Devices & services` find SWS12500 and click `Configure`.
|
||
- In dialog box choose `Windy configuration`.
|
||
|
||
|
||
- Fill in `Station ID obtained form Windy` and `Station password obtained from Windy`.
|
||
Both are required — enabling the forwarder with either one empty is rejected.
|
||
- Tick `Enable resending data to Windy`.
|
||
|
||
|
||
- You are done.
|
||
|
||
If Windy rejects the data three times in a row, the integration disables resending on its
|
||
own, writes the reason to the log and raises a persistent notification — fix the
|
||
credentials and tick `Enable resending data to Windy` again.
|
||
|
||
## Resending data to Pocasi Meteo
|
||
|
||
- If you are willing to use [Pocasi Meteo Application](https://pocasimeteo.cz) you can enable resending your data to their servers
|
||
- You must have account at Pocasi Meteo, where you will recieve `ID` and `KEY`, which are needed to connect to server
|
||
- In `Settings` -> `Devices & services` find SWS12500 and click `Configure`.
|
||
- In dialog box choose `Pocasi Meteo configuration`.
|
||
- Fill in `ID` and `KEY` you were provided at `Pocasi Meteo`.
|
||
- Optionally adjust `Resend interval in seconds` (minimum 12s, default 30s).
|
||
- Tick `Enable resending data to Pocasi Meteo`.
|
||
|
||
- You are done.
|
||
|
||
As with Windy, three unexpected responses in a row switch resending off automatically and
|
||
log the reason. The `Forwarding to Počasí Meteo` and `Forwarding status to Počasí Meteo`
|
||
diagnostic sensors show the current state.
|
||
|
||
## WSLink notes
|
||
|
||
If your station sends WSLink data over SSL (see the
|
||
[Quick Recommendations](#quick-recommendations) table above), Home Assistant has to be
|
||
reachable over SSL too — either by running Home Assistant in SSL mode, or by putting it
|
||
behind an SSL proxy. You can bypass whole-system SSL setup by using the
|
||
[WSLink SSL proxy add-on](https://github.com/schizza/wslink-addon), which is made exactly
|
||
for this integration to support WSLink on non-SSL installations of Home Assistant.
|
||
|
||
### Configuration
|
||
|
||
- Set your station up as [described above](#configure-your-station-in-ap-mode), but for
|
||
`HA port` use the port the add-on is listening on (4443 by default) — **not** the port
|
||
of your Home Assistant instance.
|
||
|
||
```plain
|
||
Home Assistant is at 192.168.0.2:8123
|
||
WSLink proxy add-on is listening on port 4443
|
||
|
||
→ set the station URL to: 192.168.0.2:4443
|
||
```
|
||
|
||
- Your station will send data to the SSL proxy and the add-on will handle the rest.
|
||
|
||
_Most stations do not care about self-signed certificates on the server side._
|
||
|
||
### Add-on health monitoring
|
||
|
||
The integration probes the add-on's health endpoint so the diagnostic entities can report
|
||
whether the proxy is online, which version it runs and which ports it uses. It has to know
|
||
the port to reach it on:
|
||
|
||
- In `Settings` -> `Devices & services` find SWS12500, click `Configure` and choose
|
||
`WSLink add-on port`.
|
||
- Set it to the same port the add-on listens on — the one you pointed the station at
|
||
above. The integration defaults to `443`, so if your add-on listens elsewhere (`4443`
|
||
in the example above), change it here.
|
||
|
||
This setting only affects the health probe; incoming station data is unaffected by it.
|