Correctly compute both the number of steps and direction when
under/overflowing the current position by performing a relative move.
This makes a repeated PlanMove() _always_ perform the move correcly,
even when the upper-level code might require to handle the overflow
itself for measurement.
Add tests for this condition by exposing the internal CurBlockShift() to
the motion unit tests.
Do not assume any step can be merged while moving three axes at the same
time.
Use the worst case scenario involving indepedent parameters for each
axis.
This commit looks horribly complex, but the main idea is to have each of the logic::commands
report their terminal OK state in the same way. That allow for leveraging this very moment
to initiate the idle timeout.
Additionally, I wanted to hide the logic of idle mode detection, which resulted in moving the
top level logic from main.cpp into logic/idle_mode.cpp and a set of additional files to compile
in unit tests.
- fix homing procedure for Idler and Selector
(homing now ends with a move to the Parking position)
- fix unit tests' startup conditions with regard to necessary
homing of Idler and Selector
TODO: still test_cut_filament fails for minor reasons
This introduces a new #define UNITTEST_MOTION which is used to control
the testing scenario:
- Normal tests, we allow the stub to override the built-in definition.
- For motion tests, we stub the lower-level classes and test the
effective implementation
We also repeat the prototype of the function, which IMHO is more
readable and more flexible: we need to use inline for the real
definition, which would require even more macros otherwise.
If the queue is full and a new move is queued, panic!
Introduce a new error code QUEUE_FULL to help diagnose situations where
the queue is handled improperly: likely one of the state machines not
waiting for the previous actions to finish.
PulseGen::PlanMove returns a boolean if the queue cannot be moved.
We could extend this to Motion::PlanMove, however all moves would then
have to check for this. Having a global check such as this ensures
we never ignore such situation.
stepTimerQuantum introduces discretization error, which makes the
acceleration curves noisy.
In rampgen generate ramps for a single moving axis in addition
of two axes moving together.
Then, in test_ramp_gen, test a single axis moving accurately, while
allow for some discretization error when two (or more) axes are running.
Pulley doesn't result in an exact step count due to the fractional
count.result in an exact step count due to the fractional count.
Use Selector instead to test values exacly.
Still check Pulley and Idler, but allowing for a +/-1 step of rounding
error.
The parameter config::AxisConfig::uSteps was supposed to be
microstepping resolution, but it's instead being used as the driver's
MRES directly.
To avoid a runtime conversion, rename the field to mRes and define a new
enum listing all the possible (and valid) microstepping resolutions.
This simplifies the code and makes clear the stepsPerUnit scale.
Assign correct stepsPerUnit to all axes as a result, including working
limits.
- Add additional information in the output generated by rampgen in order
to allow recalculating the acceleration curves independently
- Implement motion ramp checks inside test_motion_ramp.py
test_motion_ramp reads the output of a merged stepping sequence and
splits the motion of each axis, checking the acceleration curves
independently.
This ensures both that the acceleration curves are correct (as generated
by the PulseGen class) and that the multiplexed moves are too.
The nominal rate is checked exactly, while the acceleration/deceleration
segment allow for some deviation from an ideal curve.
This is currently 5% for both expected speed and acceleration, with
an absolute limit of 20mm/s of maximum difference in each point.
- Remove motion::dual_move_ramp from the Catch2 tests and reimplement
it as a minimal c++ program for the ramp validation.
- Add a skeleton python validator to check the ramp output
- Use test "fixtures" to ensure the rampgen is run (both as a test,
and to generate output) when the test_motion_ramp.py is requested.
Introduces a nasty hack to forcefully write into the constexpr SPI descriptor's registers
(which is the correct way in ASM, but kind of cumbersome in C++ now)
Yuri D'Elia
D.R.racer
Alex Voinea
DRracer